Volkswagen Polo 3 with 1994 for 2001 of release.
1. The general data
1.1. New generation of cars Polo since 1995 of release
1.2. Car identification
1.3. The general recommendations about repair
1.4. Working conditions and the tool
1.5. Instructions on use of an automobile jack and other adaptations at a car raising
1.6. Car maintenance service
1.6.1. Check of level of oil and its replacement in the engine
1.6.2. Check of level of a brake liquid
1.6.3. Check of lanterns of a signal of braking
1.6.4. Illumination check
1.6.5. Pressure check in tyres
1.6.6. Check of level of a cooling liquid
1.7. Lubricants, hermetics
1.8. Work with carving connections
2. The engine
3. Greasing system
4. Cooling system
5. Systems of injection of fuel
6. Ignition system
7. Coupling
8. A mechanical transmission
9. A drive of wheels
10. A steering without the amplifier
11. A steering with the hydraulic amplifier
12. A forward suspension bracket
13. A back suspension bracket
14. Brake system
15. An electric equipment
16. Heating and ventilation system
17. An automatic transmission
18. Appendices


1.6.6. Check of level of a cooling liquid

Level of a cooling liquid should be between corresponding labels Max and Min on a broad tank (fig. 11). In a cold condition level of a cooling liquid should reach a label Min. If the engine hot level can raise to a label Max. In case of need it is necessary to wait, when the liquid will be cooled then to add it. If the engine hot it is necessary to turn away a cover to the first emphasis and to wait pressure decrease. Then completely to turn away a cover. To use antifreeze G11 recommended by firm Volkswagen or other high-quality liquids. At use of the liquid consisting of 50 % of water and 50 % of antifreeze, the engine will keep working capacity at temperature to a minus 35 With.

Fig. 11. A broad tank of system of cooling

Back on page
1.6.5. Pressure check in tyres
On the following page
1.7. Lubricants, hermetics