Volkswagen Polo 3 with 1994 for 2001 of release.
1. The general data
2. The engine
3. Greasing system
4. Cooling system
5. Systems of injection of fuel
6. Ignition system
7. Coupling
8. A mechanical transmission
9. A drive of wheels
10. A steering without the amplifier
11. A steering with the hydraulic amplifier
12. A forward suspension bracket
12.1. Removal and installation absorber racks
12.2. Dismantling absorber racks
12.3. Repair absorber racks
12.4. Assemblage absorber racks
12.5. Removal and installation of separate details of a suspension bracket
12.6. A forward stretcher
13. A back suspension bracket
14. Brake system
15. An electric equipment
16. Heating and ventilation system
17. An automatic transmission
18. Appendices
 













12-perednyaya-podveska.html

12. A forward suspension bracket





The forward suspension bracket consists from амортизаторных racks with springs, cross-section levers and the stabilizer of cross-section stability. Connecting draughts are established between each lever of a suspension bracket and the stabilizer of cross-section stability. Draught has below carving connection with the cross-section lever of a suspension bracket, its ends are freely established in a fixing eye.
Both cross-section levers of a suspension bracket are fixed from the inside on a stretcher, and outside connected to the help of the spherical hinge with the case of the bearing of a wheel, i.e. with a rotary fist. Connection absorber racks and cases of bearings of a wheel is provided with two bolts. These bolts influence adjustment of disorder of forward wheels, therefore at dismantling it is necessary to mark position of installation of bolts before to turn on and beat out them.



Back on page
11.7. Removal and installation of the pump of the amplifier of a steering
On the following page
12.1. Removal and installation absorber racks