1.2. Car identification

Fig. 1. An arrangement of the factory identification tablet (1) with instructions of numbers of the engine (2) and bodies (3)

The factory identification tablet with a designation of model of the car is under a cowl near to the holder of the lock of a cowl in a place specified in fig. 1. Body number is beaten out on a partition of a motor compartment behind the air filter.

Fig. 2. An arrangement of tablets with engine number on the block of cylinders (1) and on a safety guard (2) gear belts

Number of the engine consisting of an alphabetic code designation of the corresponding engine and serial serial number, is beaten out on the block of cylinders (fig. 2) under the thermostat case. Faster to define engine number, it is necessary to look at the top party of a safety guard of a gear belt. On a label being there alphabetic code designations and serial number are resulted. Body and engine numbers are beaten out also on the factory identification tablet with a designation of model of the car. It is necessary to remember that initial number should be beaten out on the block of cylinders of the engine.

Besides, on a transmission the alphabetic code designation for which a transmission select to the engine is beaten out. It is necessary to specify given numbers necessarily at the order of spare parts then you will be assured that spare parts approach for your model Polo. It takes on special significance in connection with the changes which have occurred for about 1996