	Volkswagen Polo 3 with 1994 for 2001 of release.
		1. The general data
		2. The engine
			2.1. Removal and engine installation
			2.2. Dismantling and engine assemblage
			2.3. A head of the block of cylinders and valves
			2.4. Pistons and rods
			2.5. The block of cylinders
			2.6. A cranked shaft and radical bearings
			2.7. A drive газораспределительного the mechanism
			2.8. System of release of the fulfilled gases (ОГ)
		3. Greasing system
		4. Cooling system
		5. Systems of injection of fuel
		6. Ignition system
		7. Coupling
		8. A mechanical transmission
		9. A drive of wheels
		10. A steering without the amplifier
		11. A steering with the hydraulic amplifier
		12. A forward suspension bracket
		13. A back suspension bracket
		14. Brake system
		15. An electric equipment
		16. Heating and ventilation system
		17. An automatic transmission
		18. Appendices

2-dvigatel.html

2. The engine

2.1. Removal and engine installation

2.1.2. Engine and transmission installation

2.2. Dismantling and engine assemblage

2.2.1. Dismantling

2.2.2. Assemblage

2.3. A head of the block of cylinders and valves

2.3.1. Removal of a head of the block of cylinders at the established engine

2.3.2. Dismantling of a head of the block of cylinders

2.3.3. Дефектовка and repair of a head of the block of cylinders and its details

2.3.4. Assemblage of a head of the block of cylinders

2.3.5. Installation of a head of the block of cylinders

2.3.6. Hydraulic pushers

2.3.7. Replacement of a cuff of a camshaft

2.4. Pistons and rods

2.4.2. Measurement of diameters of cylinders

2.4.3. Check of pistons and rods

2.4.4. Measurement of working backlashes in шатунных bearings

2.4.5. Assemblage of pistons and rods

2.4.6. Installation of pistons and rods

2.5. The block of cylinders

2.6. A cranked shaft and radical bearings

2.6.1. Removal of a cranked shaft

2.6.2. Check of a cranked shaft

2.6.3. Installation of a cranked shaft

2.6.4. Cuffs of a cranked shaft

2.6.5. A flywheel

2.7. A drive газораспределительного the mechanism

2.7.1. Removal and installation of a gear belt

2.7.2. Check and adjustment газораспределительного the mechanism

2.7.3. Removal and camshaft installation (on the established engine)

2.8. System of release of the fulfilled gases (ОГ)

2.8.1. Removal and installation of a final collector

2.8.2. Removal and installation of system of release ОГ

Back on page
1.8. Work with carving connections

On the following page
2.1. Removal and engine installation