Volkswagen Polo 3 with 1994 for 2001 of release.
1. The general data
2. The engine
3. Greasing system
4. Cooling system
5. Systems of injection of fuel
6. Ignition system
7. Coupling
8. A mechanical transmission
9. A drive of wheels
10. A steering without the amplifier
11. A steering with the hydraulic amplifier
11.1. The steering mechanism
11.2. Replacement of steering draughts
11.3. Works on system of the hydraulic booster of a steering
11.4. Adjustment люфта steering transfer
11.5. Replacement of a belt of the pump of the amplifier of a steering
11.6. Removal and installation of details of a hydraulic drive of a steering from the amplifier
11.7. Removal and installation of the pump of the amplifier of a steering
12. A forward suspension bracket
13. A back suspension bracket
14. Brake system
15. An electric equipment
16. Heating and ventilation system
17. An automatic transmission
18. Appendices
 











11-rulevoe-upravlenie-s-gidravlicheskim-usilitelem.html

11. A steering with the hydraulic amplifier





Steering with реечным the mechanism and the hydraulic booster establish serially or under the order. It has the constant transfer relation and is equipped by a safety steering column. The steering, and also the pump of the amplifier of a steering are not subject to repair and in case of damage are replaced.
In comparison with the steering which has been not equipped with the amplifier, the steering with the amplifier fastens differently: for fastening are used скобы with rubber basic loose leaves. On fig. 249 steering fastening is shown.

Fig. 249. Details of a steering with the amplifier: 1 — the hinge of the right cross-section steering draught; 2 — a nut, 50 Нм; 3 — a fixing collar; 4 — a cover; 5 — a fixing collar; 6 — the right cross-section steering draught; 7 — a nut, 35 Нм; 8 — the lever; 9 — the hinge of the left cross-section steering draught; 10 — the left steering draught; 11 — a bolt, 30 Нм; 12 — скоба with the inserted nuts; 13 — a rubber insert; 14 — the steering mechanism; 15 — the adjusting screw; 16 — a self-stopped nut; 17 — a sealing ring; 18 — накидная a nut, 30 Нм; 19 — a tube of a returnable highway; 20 — a hollow bolt, 30 Нм; 21 — a sealing ring; 22 — a tube of a pressure head highway; 23 — a lining; 24 — a bolt with шестигранной a head, 30 Нм; 25 — the universal hinge







Back on page
10.5.4. A differential corner of a track at turn of wheels
On the following page
11.1. The steering mechanism