8.5. Differential

Fig. 202. Differential details: 1 — a separator; 2 — a semiaxis gear wheel; 3 — a round nut; 4 — an axis of satellites; 5 — the conic satellite

Fig. 203. The Assembly diagramme of differential without satellites: 1 — картер transmissions; 2 — a compensatory washer; 3 — an external ring of the bearing; 4 — the conic roller bearing; 5 — a driving wheel; 6 — a differential box; 7 — a safety pin; 8 — a speedometer drive; 9 — the conic roller bearing; 10 — a bearing ring; 11 — a compensatory washer; 12 — the coupling case; 13 — a rivet; 14 — a rivet; 15 — a conducted gear wheel; 16 — a nut, 70 Нм

Differential details are shown on fig. 202 (satellites) and 203. Both ring nuts serve in semiaxial gear wheels of differential for ввинчивания fastening bolts приводных flanges. The axis of satellites of differential is kept by two corners, on one on each party which in drawing are not shown. They are used only in the event that the conducted wheel of the main transfer is attached to a box of differential by rivets. If a driving wheel напрессовано on a box in a hot condition, for axis fixing both are used spring распорных a pin 16 (203), on one fig. see each party of an axis. Differential removal is described in подразд. 8.2.