Volkswagen Polo 3 with 1994 for 2001 of release.
1. The general data
2. The engine
3. Greasing system
4. Cooling system
5. Systems of injection of fuel
6. Ignition system
7. Coupling
8. A mechanical transmission
8.1. Removal and transmission installation
8.2. Dismantling and check
8.3. Check of details of a transmission
8.4. Transmission assemblage
8.5. Differential
8.6. The gear change mechanism
9. A drive of wheels
10. A steering without the amplifier
11. A steering with the hydraulic amplifier
12. A forward suspension bracket
13. A back suspension bracket
14. Brake system
15. An electric equipment
16. Heating and ventilation system
17. An automatic transmission
18. Appendices


8.3. Check of details of a transmission

All details should be washed out carefully in kerosene then to dry up compressed air. All gear wheels, bearings, synchronizers etc. are necessary for checking up on deterioration and presence of damages.
It is possible to replace gear wheels without replacement of a corresponding gear wheel of other shaft.

«Back on page
8.2.5. Dismantling of a conducted shaft
On the following page»
8.4. Transmission assemblage