Volkswagen Polo 3 with 1994 for 2001 of release.
1. The general data
2. The engine
3. Greasing system
4. Cooling system
5. Systems of injection of fuel
6. Ignition system
6.1. The general data
6.2. Safety measures at work on ignition system
6.3. The high voltage transformer
6.3.1. Check of giving of pressure
6.3.2. Management check
6.4. The ignition distributor
6.5. Installation of the moment of ignition
6.6. Spark plugs
7. Coupling
8. A mechanical transmission
9. A drive of wheels
10. A steering without the amplifier
11. A steering with the hydraulic amplifier
12. A forward suspension bracket
13. A back suspension bracket
14. Brake system
15. An electric equipment
16. Heating and ventilation system
17. An automatic transmission
18. Appendices
 







На vendoshop.ru кофе для вендинговых автоматов.
ЖД билеты днепр: расписание поездов.






6-3-1-proverka-podachi-napryazheniya.html

6.3.1. Check of giving of pressure

For check it is necessary to execute the following:


Fig. 127. Check of giving of power supplies on an electric socket of the transformer of a chain of ignition: 1, 2, 3 — contacts; 4 — the basic socket of a food




- To disconnect the tip from the transformer. To establish the tip in the position shown on fig. 127, and to connect the voltmeter to contacts 1 and 3;
- To include ignition and to check up, that pressure made not less than 11 In (usually it equally 12–14);
- If the pressure indication is absent to switch off ignition and to check up current passage between contact 1 and "weight".



Back on page
6.3. The high voltage transformer
On the following page
6.3.2. Management check