|
14-8-2-snyatie-i-ustanovka-rychaga-stoyanochnogo-tormoza.html
14.8.2. Removal and installation of the lever of a lay brake
|
|
Fig. 310. Installation of the lever and cables of a lay brake: 1 — the lever of a lay brake; 2 — the lever handle; 3 — a decorative overlay of the lever; 4 — шестигранные nuts; 5 — the equalizer; 6 — an adjusting nut; 7 — cables of a lay brake; 8 — a counternut
|
On fig. 310 details of fastening of the lever of a lay brake are presented. Before to disconnect the lever, it is necessary to remove a back part of the central console. Cables of a lay brake before it should be disconnected. For some moments it is necessary to pay special attention: - Under the handle 2 (fig. 310 see ) lever of a lay brake there is a clamp of fastening of the handle which is necessary for delaying downwards before it will be possible to remove the handle; - To remove a decorative overlay 3 from the lever, it should be raised;
- After repeated installation of the lever of a lay brake it is necessary to adjust a lay brake as it is described earlier.
|