Volkswagen Polo 3 with 1994 for 2001 of release.
1. The general data
2. The engine
3. Greasing system
4. Cooling system
5. Systems of injection of fuel
6. Ignition system
7. Coupling
8. A mechanical transmission
9. A drive of wheels
10. A steering without the amplifier
10.1. Removal and steering dismantling
10.2. Adjustment люфта the steering mechanism
10.3. A steering column
10.4. Cross-section steering draughts
10.5. Adjustment of forward wheels
10.5.1. A convergence of wheels
10.5.2. Disorder
10.5.3. A longitudinal inclination of an axis of turn of wheels
10.5.4. A differential corner of a track at turn of wheels
11. A steering with the hydraulic amplifier
12. A forward suspension bracket
13. A back suspension bracket
14. Brake system
15. An electric equipment
16. Heating and ventilation system
17. An automatic transmission
18. Appendices

фанера Казань оптом.


10.5.2. Disorder

Considering a design of the forward bridge disorder it should be regulated in a junction between the case of the bearing of a wheel (a rotary fist) and absorber a rack. For adjustment the special tool is required. It is a question of the tool used for an extract of deformed bodies which is established between the case of the bearing of a wheel and a body and works by means of the screw on a release. After an inhaling of bolts of a detail remain in new position.
If it is possible to assume that disorder does not correspond to initial value, and the forward bridge is not warped, for disorder adjustment it is necessary to address in automobile repair shop.
Wheel disorder is measured in the standard way. If disorder is not in limits of the values specified in specifications or if the divergence between the left and right party makes more than 30 ' it is necessary to execute the specified updating.

Back on page
10.5.1. A convergence of wheels
On the following page
10.5.3. A longitudinal inclination of an axis of turn of wheels