Volkswagen Polo 3 with 1994 for 2001 of release.
1. The general data
2. The engine
3. Greasing system
3.1. Removal and installation of the oil pallet
3.2. The oil pump
3.3. The oil filter
3.4. Check of pressure of oil
3.5. Replacement of engine oil and the oil filter
4. Cooling system
5. Systems of injection of fuel
6. Ignition system
7. Coupling
8. A mechanical transmission
9. A drive of wheels
10. A steering without the amplifier
11. A steering with the hydraulic amplifier
12. A forward suspension bracket
13. A back suspension bracket
14. Brake system
15. An electric equipment
16. Heating and ventilation system
17. An automatic transmission
18. Appendices
 











3-3-maslyanyjj-filtr.html

3.3. The oil filter


Fig. 95. Use of a chain key for removal of the oil filter




It is necessary to replace the oil filter according to instructions of the maintenance instruction or at each repair of the engine. For filter removal it is necessary to use a special key (fig. 95) which can be got in shop of autospare parts, or to punch an edge of a screw-driver a lateral face of the filter and, using the handle as the lever, to turn away the filter.
Instructions on filter installation are resulted on a filter label. On a flange to establish always a new sealing ring, slightly having greased it. The new filter should be fixed at installation manually. In summary to check up oil level in the engine and if necessary to finish it to the normal.


«Back on page
3.2.2. Check and repair of the oil pump
On the following page»
3.4. Check of pressure of oil