|
|
Fig. 89. The details which are subject to removal for dismantle of the oil pump, and other details of system of greasing: 1 — a stopper маслоналивного apertures; 2 — the gauge of pressure of oil (0,25 bar); 3 — a bolt, 10 Нм; 4 — a directing tube for маслоизмерительного щупа; 5 — directing (it is used in a workshop for an engine oil fence); 6 — маслоизмерительный щуп; 7 — a camshaft pulley; 8 — the oil filter; 9 — an asterisk on cranked to a shaft; 10 — a tension roller of a gear belt; 11 — a nut, 20 Нм; 12 — a gear belt газораспределительного the mechanism; 13 — the top casing of a gear belt; 14 — the bottom casing of a gear belt; 15 — a bolt, 90 Нм + 120 ; 16 — ременный (shock-absorber) pulley; 17 — a gear pulley of a cranked shaft; 18 — маслоуплотнительное a ring; 19 — a flange with маслоуплотнительным a ring; 20 — a lining (to replace always); 21 — the condensing plug; 22 — a drive chain; 23 — the oil pump; 24 — a cover of the oil pump with редукционным the valve; 25 — a stopper маслосливного apertures, 30 Нм; 26 — a sealing ring (to replace always); 27 — the oil pallet; 28 — a bolt of fastening of an oil bath; 29 — a lining (if it is established); 30 — fastening knot on the bottom party картера; 31 — a sealing ring of round section (to replace always); 32 — to the air filter; 33 — маслоналивная a pipe
|