15.4.3. Adjustment of light of headlights

Fig. 334. An arrangement of regulators of light of headlights: 1 — light regulator across; 2 — light regulator on a vertical

The device for adjustment of headlights is on a motor board передка. On the back party of a headlight two regulators (fig. 334) are located. In drawing the right headlight is shown. At the left headlight regulators are located mirror.

Fig. 335. An aperture for adjustment of light of a headlight

Fig. 336. A way of adjustment of light of headlights: 1 — an aperture through which rotate a regulator of light of headlights across; 2 — an aperture through which rotate регулитор light of headlights on a vertical

To regulate light of headlights it is necessary by means of the special adjusting device and only as a last resort it is possible to try to modify adjustment or to change it. For adjustment to establish the car perpendicularly to a door or a garage wall on distance about 5 m and to include headlights. For adjustment of light of headlights to insert, as is shown in fig. 335, a crosswise screw-driver through an aperture over a headlight. Not to damage a regulator, it is necessary to use very thin screw-driver. If to insert a screw-driver into an aperture 2 shown on fig. 336, and to turn a regulator to the right the beam of light of headlights rises upwards. If to insert a screw-driver into an aperture 1 and to turn a regulator to the right the beam of light of headlights is displaced to the central longitudinal axis of the car. At regulator turn to the left the bunch is displaced in an opposite side.