Volkswagen Polo 3 with 1994 for 2001 of release.
1. The general data
2. The engine
3. Greasing system
4. Cooling system
5. Systems of injection of fuel
6. Ignition system
7. Coupling
8. A mechanical transmission
9. A drive of wheels
10. A steering without the amplifier
11. A steering with the hydraulic amplifier
12. A forward suspension bracket
12.1. Removal and installation absorber racks
12.2. Dismantling absorber racks
12.3. Repair absorber racks
12.4. Assemblage absorber racks
12.5. Removal and installation of separate details of a suspension bracket
12.6. A forward stretcher
13. A back suspension bracket
14. Brake system
15. An electric equipment
16. Heating and ventilation system
17. An automatic transmission
18. Appendices
 











12-6-perednijj-podramnik.html

12.6. A forward stretcher


Fig. 277. A forward stretcher with draught of the stabilizer: 1 — колпачковая a nut; 2, 4 — rubber support of a suspension bracket; 3 — a bolt; 5 — directing rubber support; 6 — a bolt with шестигранной a head; 7 — a washer; 8 — a rubber basic pillow; 9 — draught of the stabilizer; 10 — a bolt, 25 Нм; 11 — a tightening detail; 12 — the suspension bracket console; 13 — a nut, 50 Нм; 14 — a stretcher; 15 — a bolt, 50 Нм + to tighten on 90




The forward stretcher should act in film, for example, at removal of the mechanism of a steering. Corresponding works are described in section 10 and 11. Features of fastening are specified in fig. 277. Bolts 15 are necessary for tightening the moment 50 Нм, then to tighten on 90 .
For replacement of the worn out rubber support 4 балансирной suspension brackets for a suspension bracket beam it is necessary to remove a stretcher completely.



Back on page
12.5.4. Removal and installation of the stabilizer of cross-section stability
On the following page
13. A back suspension bracket