Volkswagen Polo 3 with 1994 for 2001 of release.
1. The general data
2. The engine
3. Greasing system
4. Cooling system
4.1. A cooling liquid
4.1.1. Plums of a cooling liquid and filling of system of cooling
4.1.2. Antifreeze
4.2. A radiator and вентилято
4.3. The water pump
4.4. The thermostat
5. Systems of injection of fuel
6. Ignition system
7. Coupling
8. A mechanical transmission
9. A drive of wheels
10. A steering without the amplifier
11. A steering with the hydraulic amplifier
12. A forward suspension bracket
13. A back suspension bracket
14. Brake system
15. An electric equipment
16. Heating and ventilation system
17. An automatic transmission
18. Appendices


4.1.2. Antifreeze

The cooling system is filled with antifreeze on manufacturer, it should be left in system within all first year of operation of the car. If it is required to prepare a mix with antifreeze at mixing it is necessary to observe following parities. It is recommended to use antifreeze G11 of firm Volkswagen as its chemical compound is specially developed for the given engine. Parities of components of a mix at various values of temperature are that:
- To freezing temperature–25 With: 2,25 l of antifreeze, 3,35 l of water;
- To freezing temperature–35 With: 2,8 l of antifreeze, 2,8 l of water.
Depending on the established equipment the capacity of system of cooling can be increased.

Back on page
4.1.1. Plums of a cooling liquid and filling of system of cooling
On the following page
4.2. A radiator and вентилято