Volkswagen Polo 3 with 1994 for 2001 of release.
1. The general data
2. The engine
3. Greasing system
4. Cooling system
5. Systems of injection of fuel
6. Ignition system
7. Coupling
8. A mechanical transmission
9. A drive of wheels
10. A steering without the amplifier
11. A steering with the hydraulic amplifier
12. A forward suspension bracket
13. A back suspension bracket
14. Brake system
14.1. Adjustment of brakes
14.2. Forward disk brakes
14.3. Back drum-type brakes
14.4. The main brake cylinder
14.4.1. Removal and installation of the main brake cylinder
14.4.2. Repair of the main brake cylinder
14.5. The amplifier of a brake drive
14.6. Prorolling of a hydrodrive of brake system
14.7. A regulator of pressure of brakes
14.8. A lay brake
14.9. Antiblocking system (ABS)
15. An electric equipment
16. Heating and ventilation system
17. An automatic transmission
18. Appendices
 













14-4-1-snyatie-i-ustanovka-glavnogo-tormoznogo-cilindra.html

14.4.1. Removal and installation of the main brake cylinder

The main brake cylinder is fixed by bolts at an end face of the amplifier of a brake drive.
For its removal it is necessary to execute following operations:
- To turn on the union of pipelines and cautiously to take brake tubes aside;
- To disconnect from clips contacts of the switch of a signal of braking;
- To disconnect the cylinder. It is necessary to remember that the rubber sealing ring is under the cylinder.
Cylinder installation is spent to sequences, return to removal. The bar of a pusher of the amplifier of a brake drive does not require adjustment.



Back on page
14.4. The main brake cylinder
On the following page
14.4.2. Repair of the main brake cylinder